 |
 |
 |
 |
 |
Under construction!
 |
Servo7QG - UART and I2C controler for 7 servos This circuit was developed for the needs of the robotic arm PidiArm, precisely control its servos modeler. The reason for developing self-governance was that commercially available circuits are usually not able to make a smooth move by themselves and must be implemented in ways that are sensitive to speed communication with the superior circuit. But Servo7QG is solution of this and some other problems, so it could be operated via relatively slow I2C bus. 2010-10-28 23:31:58 |
 |
Simple code lock Sorry, but this article is not available in selected language yet. 2010-02-16 12:08:39 |
 |
Starting with HCS08 microcontrolers Sorry, but this article is not available in selected language yet. 2009-09-27 22:00:52 |
 |
OSBDM - Review of the cheap BDM interafece Sorry, but this article is not available in selected language yet. 2009-08-07 10:31:42 |
All right nearly reserved. Copypaste © 2024 Mica
Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution 3.0 License
Except where otherwise noted, content on this site is licensed under a Creative Commons Attribution 3.0 License
